BCFSD - OMP-2 ORGANOTIN POLYMER

  • MSDS: BCFSD
  • Manufacturer: M AND T CHEM INC
  • Product Name: OMP-2 ORGANOTIN POLYMER
  • National Stock Number: 6850-00N000547
Product Identification

Product ID:OMP-2 ORGANOTIN POLYMER
MSDS Date:01/01/1985
FSC:6850
NIIN:00N000547
MSDS Number: BCFSD

Responsible Party
M&T CHEM. INC.

Emergency Phone: 201-499-2401 DAY

Cage: GO885

Contractor
M&T CHEM. INC.

Cage: GO885

Ingredients

CYCLOHEXANONE (SARA III)

CAS: 108-94-1

RTECS: GW1050000

Fraction By Weight: 55%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:MAY CAUSE IRRIT OF EYES/SKIN. FUMES/VAPORS MAY
BE IRRIT TO UPPER RESP TRACT.

First Aid

First Aid:EYE: IMMED FLUSH W/WATER AT LEAST 15 MIN, CALL MD. SKIN:
REMOVE CONTAM CLOTHING & SHOES. WASH SKIN THOROUGHLY W/SOAP &
WATER, CALL MD. WASH CLOTHING BEFORE REUSE.

Fire Fighting

Flash Point:111F TCC
Lower Limits:1.1
Extinguishing Media:WATER SPRAY, CO*2, FOAM, DRY CHEM
Fire Fighting Procedures:AVOID SKIN/EYE CNTCT. DO NOT BREATHE FUMES.
Unusual Fire/Explosion Hazard:COMBUSTIBLE IF EXPOSED TO ELEVATED TEMPS,
SPARKS, OPEN FLAME

Accidental Release

Spill Release Procedures:CONFINE AREA OF SPILL. COVER W/SAND OR OTHER
INERT MATL. TRANSFER TO METAL CNTNRS FOR DISPOSAL. MFR STATES PROD
CONSIDERED TO BE TOXIC TO AQUATIC LIFE IF DISCHARGED TO OPEN
WATERS.

Handling

Handling and Storage Precautions:STORE IN COOL, DRY AREA AWAY FROM
IGNITION SOURCES. MAY CAUSE IRRIT. WASH THOROUGHLY AFTER HANDLING.
AVOID EYE/SKIN CNTCT.
Other Precautions:ALL ORGANOTIN CMPDS HAVE TLV OF O.1MG/CUM,
SKIN(ACGIH). DO NOT BREATHE VAPORS OR FUMES.

Exposure Controls

Respiratory Protection:NOT NORM REQ
Ventilation:LOCAL EXHST REC, MECH REQ
Protective Gloves:RUBBER
Eye Protection:CHEM WORKER GOGGLES
Other Protective Equipment:NOT NORM NEC
Supplemental Safety and Health
NITE EMER: 201-499-2445. VAP PRESS MEASURED AT 38C. AUTOIGNITION TEMP:
788F. LEL MEASURED AT 100C.

Chemical Properties

Boiling Pt:B.P. Text:155C
Vapor Pres:10
Vapor Density:3.4
Spec Gravity:1.056
Solubility in Water:SLIGHT
Appearance and Odor:YELLOW LIQ, CHARACTERISTIC ODOR
Percent Volatiles by Volume:55

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS
Stability Condition to Avoid:CNTCT W/IGNITION SOURCES, ELEVATED TEMPS,
SPARKS, FLAME
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:MFR SUGGESTS INCINERATION OR DISPOSAL AS SOLID
WASTE. FOLLOW ALL LOCAL, STATE, FED REG.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.